In 2026, the question isn’t just “When was your last inspection?” but “What is your equipment’s Condition of Maintenance (COM)?”. Under the mandatory 2023 NFPA 70B standard, your maintenance schedule is now dictated by the actual state of your gear, not just a calendar date.
The Three Conditions of Maintenance
The standard breaks down electrical equipment into three distinct categories:
-
Condition 1 (Like New): Equipment that is properly installed, maintained, and operating in a clean, controlled environment.
-
Condition 2 (Average): Equipment that shows normal wear or has had minor previous repairs but is generally reliable.
-
Condition 3 (High Risk): Equipment that has missed maintenance cycles, shows signs of physical stress, or operates in harsh, “high-hazard” environments.
How Condition Impacts Your Mandatory Intervals
The stakes for Condition 3 equipment are significantly higher.
| Equipment Status | Mandatory Thermal Scan Interval |
| Condition 1 or 2 | Every 12 Months |
| Condition 3 | Every 6 Months |
The Cost of Ignoring Condition 3
Allowing a high-risk asset to operate without increased oversight is an invitation for disaster. Condition 3 assets are the most likely to cause the electrical fires that cost U.S. businesses millions annually. By identifying these assets through a Thermal Imaging Audit, you move from reactive “firefighting” to strategic planning.
Building Your 2026 Maintenance Strategy
Compliance requires a documented Electrical Maintenance Program (EMP). This program must rank every asset by its condition and set the corresponding 6-month or 12-month inspection dates.
Allied Contractors LLC (TECL: 34231) specializes in helping Texas facility managers transition to this new condition-based model. We provide the certified thermal scans and documentation required to satisfy both local inspectors and your insurance carrier.
⚖️ COMPLIANCE NOTICE & LEGAL DISCLAIMER
-
LICENSING DISCLOSURE: This guide is provided by Allied Contractors LLC, a licensed electrical contractor in the State of Texas. TECL: 34231.
-
INFORMATIONAL PURPOSE ONLY: This information is for general educational purposes only and does not constitute legal advice or a professional engineering opinion. While we aim for accuracy based on the 2023 NEC and 2024 IECC, codes vary by local municipality.
-
REGULATORY NOTICE: Regulated by The Texas Department of Licensing and Regulation, P.O. Box 12157, Austin, Texas 78711, 1-800-803-9202; www.tdlr.texas.gov.
-
NO MISREPRESENTATION OF NEED: This guide is not a final determination of your facility’s compliance status. The actual need for services can only be determined through a site-specific inspection.
-
AFFILIATION: Allied Contractors is a private, licensed commercial electrical contractor. We are not a government agency.
